DETAILS
WELDING TRAINING, UP CLOSE AND PERSONAL
- Comprehensive array of tools and accessories from various welding and cutting processes
- Cutaway Harris® gas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and application
- The Teaching Aid Toolbox is fully supported with Lincoln Electric U/LINC® curriculum lesson plans and more
- Bring actual welding and cutting tools into the classroom to better illustrate the principles of each process
- Boosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniques
- Included weld sample coupons allow instructors to illustrate various welding joints and typical beads
- A set of weld discontinuity flashcards allow you to show and discuss common weld flaws
Curriculum in a Cabinet
Build on the Basics
Bridge the Classroom and the Lab
Features
- Comprehensive array of tools and accessories from various welding and cutting processes
- Cutaway Harrisgas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and application
- Fully supported with Lincoln Electric U/LINC curriculum lesson plans and more
- Bring actual welding and cutting tools into the classroom to better illustrate the principles of each process
- Boosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniques
- Drawer 5-Weld Samples: Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Edge Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Three Pass T Joint 100/75/50, 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm), Discontinuities Flash Cards
Disclaimers
Service Information
What's Included
- DRAWER 1 - SMAW|T300 Electrode Holder|EH-305HD Magnum® Electrode Holder|200A Electrode Holder|GC-300 Work Clamp|3/32 in. (2.4 mm) Bare Stick Electrode Rod|1/8 in. (3.2 mm) Bare Stick Electrode Rod|5/32 in. (4.0 mm) Bare Stick Electrode Rod|Excalibur® 7018 MR 3/32 in. (2.4 mm) 1 lb Tube Stick Electrode|
- DRAWER 2 - GTAW|PTA-17V Torch Body|PTA-17V Torch Body|PTA-17F Torch Body|PTA-17 Torch Handle|PTA-17 3/32 in. (2.4 mm) Collet|PTA-17 3/32 in. (2.4 mm) Collet Body|PTA-17 Backcap- Long|PTA-17 Alumina Nozzle #6|GLK-3 Basic TIG Kit|
- DRAWER 3 - GMAW / FCAW|Magnum® PRO 550 Assembly|Magnum® PRO 250L Assembly|Flux-Cored/MIG Wire Drive Roll 0.035 - .045 in. (0.9 - 1.1 mm) Knurled|Drive Roll Kit Combination 0.035/.045 in. (0.9-1.1 mm) Solid Wire Smooth|Magnum® PRO MIG Gun Diffuser- 550A- Slip-On|Magnum® PRO Gas Nozzle 550A- Slip-On- Flush- 3/4 in. ID|Magnum® PRO Gas Nozzle 350A- Thread-On- Flush- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- Thread-On- Recessed- 1/2 in. ID|Magnum® PRO Bottleneck Gas Nozzle 350A- Thread-on- Flush- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- 1/8 In. Stickout- Thread-on- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- Flush- Thread-On- 3/8 in. ID|Magnum® PRO MIG Gun Diffuser- 350A- Slip-On|Magnum® PRO Gas Nozzle 350A- Flush- Slip-On- 1/2 in. ID|Magnum® PRO MIG Gun Diffuser- 350A- Extended Reach- Thread-On|Magnum® PRO Gas Nozzle 350A- Extended Reach- Thread-On- Recessed- 1/2 in. ID|Magnum® PRO Contact Tip 550A- 0.035 in Dia.|Magnum® PRO Contact Tip- 350A- Tapered- 0.035 in Dia.|Magnum® PRO 350 Gas Diffuser Thread-On|Magnum® PRO Barrel 550 Nozzle Assembly 550A- Thread-On-|Recessed- 5/8 in. ID|Magnum® PRO MIG Gun Diffuser- 550A- Thread-On|
- DRAWER 4 - CUTTING|Tomahawk® LC40 Plasma Cutting Torch Assembly|Tomahawk® LC40 Electrode|Tomahawk® LC40 Swirl Ring|Tomahawk® LC40 Nozzle (40 A)|Cutaway Harris® Oxyfuel Torch|Cutaway Harris® Gas Regulator|Acetylene Heating Assembly|Acetylene Two-Piece Preheat Tip|Cutting Tip|
- DRAWER 5 - WELD SAMPLES|Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Edge Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Three Pass T Joint 100/75/50 -1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm)|6 Pass Groove 100/83/66/50/33/16 -3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm)|Discontinuities Flash Cards
Documentation
Specifications
Product Weights & Dimensions
| Dimensions (H x W x D) | |
| Net Weight | 56.7 lbs (56.7 kg) |