Portable Wire Feeders

LN-25X Wire Feeder with CrossLinc™ Technology

K4267-1

Select Product

Top Features

  • Reduce job site clutter by removing cumbersome control cables
  • Eliminate unnecessary movement of personnel across the worksite
  • Eliminate the need to drag control cables around the site
  • Full voltage control at the feeder results in the correct settings for every weld
  • Accurately compensate for voltage drop across long cable runs

Processes

MIG, Pulsed, Flux-Cored

Output

Input

Wire Feeder

MSRP: $2,390.95

Where To Buy

Equipment Details

FULL CONTROL OF YOUR SYSTEM WITH NO CONTROL CABLES

Safety

  • Reduce job site clutter by removing cumbersome control cables
  • Eliminate unnecessary movement of personnel across the worksite
  • Eliminate the need to drag control cables around the site

Quality

  • Full voltage control at the feeder results in the correct settings for every weld
  • Accurately compensate for voltage drop across long cable runs
  • Eliminate unintentional machine adjustments

Productivity

  • Set up faster with fewer cable connections
  • Eliminate helpers or trips to the power source when making setting adjustments
  • Minimize rework with easy settings adjustment

Reliability

  • Fully encapsulated and environmentally protected electronics
  • Replaceable flame resistant case can be installed in under five minutes

 

 

 

CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures.

In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight welding wire feeder, connected to a weather-resistant power source hundreds of feet away.

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.

‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is
not possible.

The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.

There has to be a better way.

 

Solid Wire Size Range
  • .023-1/16 in. (0.6-1.6 mm)
Cored Wire Size Range
  • .030-5/64 in. (0.8-2.0 mm)
Wire Speed Range IPM (m/min)
  • 50-700 ipm (1.3-17.7 m/min)
Dimensions (H x W x D) 15 in x 8.7 in x 23.2 in (381 mm x 221 mm x 589 mm)
Net Weight 40.50 (18.37 kg)
  • Internal Contactor
  • Gas Solenoid
  • Flowmeter
  • Arc Sensing Lead & Clip, 15 ft. (4.5 m)
  • 2 Gun Bushings (K1500-2 installed; K1500-1 loose)

 

KEY CONTROLS

1. Wire Feed Speed/Amperage Digital Display
2. Wire Feed Speed LED
3. Amperage LED
4. Wire Feed Speed Knob
5. 5-Pin Gun Trigger Connection
6. Work Clip Connection
7. Thermal LED
8. Voltage Digital Display
9. Voltage LED
10. CrossLinc™ LED
11. Voltage Knob
12. Gas Purge Button
13. Flow Meter Valve
14. Shielding Gas Inlet
15. Electrode Lead

 

Category
Product Number
Product Name
General
K126® PRO Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332
General
Magnum 550 Connector Kit - LN-8/-9 1/16 and Up
General
K126® PRO Innershield® 350A FCAW-SS Welding Gun 15 ft 1/16-5/64
General
Connector Kit - LF-72-74, LN-25 Pro, Power Feed 25M
General
Preflow, Postflow and Burnback Timer Kit
General
Weld Cable Package - Work Lead 2/0 - TM & GC500 - 15 ft / Power Lead 2/0 - TM & Lug - 10 ft (3 m)
General
Weld Cable Package - Work & Power Lead 2/0 - Tweco® Male & GC500 / Tweco® Male & Lug - 10 ft (3 m)
General
Weld Cable Package - Work Lead - TM & GC500 Ground Clamp (2/0, 350A, 60%) - 15 ft (15.3 m)
General
GC-300 Work Clamp - 300A, 60% Duty Cycle
General
GC-500 Work Clamp - 500A, 60% Duty Cycle
General
Deluxe Adjustable Gas Regulator and Hose Kit
General
Jumper Plug Kit
General
Spindle Adapter for 14 lb. Coils
General
Spindle Adapter for Small Spools
General
Replacement Case Kit - Polycarbonate
General
Twist Mate™ Plug - For 2/0-3/0 (70-95mm2) Cable
General
Gun Receiver Bushing for Lincoln Electric Guns
General
Gun Receiver Bushing for Tweco® #2 - #4 Guns
General
Gun Receiver Bushing for Tweco® #5 Guns
General
Gun Receiver Bushing for Miller® Guns
General
Gun Receiver Bushing for OXO® Guns
Product Number
Product Name
Drive Roll Kit .023-.030 in (0.6-0.8 mm) Solid Wire
Drive Roll Kit .035 in (0.9 mm) Solid Wire
Drive Roll Kit .045 in (1.1 mm) Solid Wire
Drive Roll Kit .052 in (1.3 mm) Solid Wire
Drive Roll Kit Combination .035 in / .045 in Solid Wire
Drive Roll Kit .040 in (1.0 mm) Solid Wire
Drive Roll Kit 1/16 (1.6 mm) in Solid Wire
Drive Roll Kit .030 - .035 in (0.8 - 0.9 mm) Cored Wire
Drive Roll Kit .040 - .045 in (1.0 - 1.2 mm) Cored Wire
Drive Roll Kit .052 in (1.3 mm) Cored Wire
Drive Roll Kit 1/16 in (1.6 mm) Cored Wire
Drive Roll Kit .068 - .072 in (1.8 mm) Cored Wire
Drive Roll Kit 5/64 in (2.0 mm) Solid/Cored Wire
Drive Roll Kit 3/32 in (2.4 mm) Solid/Cored Wire
Drive Roll Kit .035 in (0.9 mm) Aluminum Wire
Drive Roll Kit .040 in (1.0 mm) Aluminum Wire
Drive Roll Kit 3/64 in (1.2 mm) Aluminum Wire
Drive Roll Kit 1/16 in (1.6 mm) Aluminum Wire
Product Number
Product Name
Weld Power Cable - TM to Lug (1/0, 350A, 60%) - 10 ft (3 m)
Weld Power Cable - Lug to Lug (3/0, 600A, 60%) - 10 ft (3 m)
Weld Power Cable - Lug to Lug (3/0, 600A, 60%) - 35 ft (10.6 m)
Weld Power Cable - Lug to Lug (3/0, 600A, 60%) - 60 ft (18.3 m)
Weld Power Cable - Lug to Lug (4/0, 600A, 60%) - 110 ft (33.5 m)
Weld Power Cable - TM to TM (1/0, 350A, 60%) - 25 ft (7.6 m)
Weld Power Cable - Twist Mate to Twist Mate (2/0, 350A, 60%) - 50 ft (15.2 m)