Engine Driven Welders view all

Cross Country® 300 Engine Drive (Kubota®) Stainless Steel w/ Wireless Remote

K4166-3

Top Features

  • Intuitive constant current (CC), constant voltage (CV) and TIG mode control
  • Easily change over from stick to wire to TIG welding processes
  • Single and three phase AC generator power for grinders, pumps and trailers
  • Compact, lightweight package that will fit into any truck bed
  • Puddle performance is excellent for root, fill and cap passes for cellulosic or low hydrogen stick electrodes

Processes

Stick, Flux-Cored, MIG, TIG, Gouging

MSRP: $17,863.85

Where To Buy

Equipment Details

PURPOSE-BUILT FOR PIPE WELDING

When you’re in the cross-country pipeline welding business, your results are only as good as the arc quality, reliability and portability of your equipment. The Cross Country® 300 engine-driven welder gives you all three of these and more.

The Cross Country 300 keeps the operation simple with intuitive constant current (CC), constant voltage (CV) and TIG mode control. This enables the user to easily change over from stick to wire to TIG welding processes.

But the worker in the field sometimes needs more than just a welder. The Cross Country 300 gives you plenty of single and three phase AC generator power for grinders, pumps and trailers.

It all comes in a compact, lightweight package that will fit into any truck bed and give you plenty of visibility through the rear window.

 

It is All About the Arc

Out on the pipeline spread, your job depends on whether each and every weld passes inspection. The Cross Country 300 stick arc was tuned by pipeline welders for pipeline welders. That means puddle performance is excellent for root, fill and cap passes and designed for cellulosic or low hydrogen stick electrodes.

 

The Size is Right

On remote job sites, you have to carry everything with you. This puts space on your rig at a premium. The Cross Country 300 is the most compact engine-driven pipe welder in its class and easily fits on most trucks. That means you get a small footprint, short height for great visibility through the truck’s rear window and lower weight to go easier on your truck’s suspension.

 

Easy To Use

It’s easy to get started with the Cross Country 300. Dual continuous controls designed for pipeline welding help you tune the arc for the pipe, pass, position, conditions and more. Fewer controls improve simplicity and reliability. Service access for routine maintenance is easy, even on the truck, with sliding engine access doors on each side of the machine. Battery jumper studs are also conveniently located. Digital meters and dashboard gauges monitor key functions. The powder-coated steel enclosure and polished stainless steel exhaust stack will look great on your rig and will stand up to years of cross country travel. The new heavy-duty stainless steel case and rugged wired or wireless remotes add to the durability and utility of these welders.

 

Flexible

When your project calls for wire or TIG welding, you’ll be ready. The Cross Country 300 supports DC stick, wire and TIG processes and easily connects to Lincoln Electric wire feeders. The powerful generator produces plenty of power for grinders, pumps and travel trailers – up to 11kW continuous three phase power. An engine block heater, standard equipment on the Cross Country 300, enables operation in cold weather environments.

 


 

MAKE IT YOUR OWN!
Free personalized Nameplate for your Cross Country 300 Welder

Cross Country 300 Nameplate

Here’s your chance to personalize your new Cross Country 300 engine-driven welder with a stainless steel nameplate carrying your own name and the serial number of the machine.

It’s Easy. . .and It’s FREE!

1. Visit www.metalfabgroup.com/lincolnelectric
2. Complete the online form
3. Wait for the custom plate to arrive in the mail

Rated Output
  • DC Pipe Current: 300A/32V/100%

  • Range: 40 to 300 AMPS
  • DC Touch Start TIG®: 250A/30V/100%
  • Range: 20-250 Amps

    DC Constant Voltage: 300A/32V/100% 350A/28V/100%

  • Range: 14-32 Volts Single Dial Continuous Control

Generator Output
  • Single Phase: 10kW Continuous
  • Three Phase: 11 kW Continuous
Type of Engine
  • Kubota® V1505 EPA Tier 4 Final
HP and speed
  • 22 HP @ 1800 RPM
Cylinders
  • 4
Dimensions (H x W x D) 31.9 in x 25.3 in x 56.0 in (810 mm x 643 mm x 1422 mm)
Net Weight 1034.00 (469.02 kg)

CONTROLS

 

 

  1. Ammeter
  2. Output
  3. Stop / (Low Idle/Run) / (High Idle/Run) Switch
  4. Start Button
  5. Glow Plug Push Button
  6. Dash Board Gauge
  7. 120 Volt Single Phase Ac Power
  8. Volt Meter
  9. Control
  10. Weld Mode Selector Switch
  11. 6-Pin Connector
  12. 120/240 Volt Single Phase Ac Power
  13. 240 Volt 3 Phase Ac Power
  14. Weld Output Terminals With Flange Nut
    14a. Work Lead For Cv Welding
    14b. Work Lead For Stick And Tig
  15. Ground Stud

 


 

Category
Product Number
Product Name
General
Remote Output Control with 120V AC Receptacles – 125 ft
General
Remote Output Control – 125 ft
General
Medium Two-Wheel Road Trailer with Duo-Hitch®
General
Fender and Light Kit
General
Cable Rack
General
Four-Wheel Steerable Yard Trailer with Duo-Hitch®
General
Spark Arrester Kit
General
Power Plug Kit (20 amp)
General
Full-KVA Adapter Kit
General
VRD Kit Voltage Reduction Device
General
Cold Weather Kit
TIG
PTA-26V TIG Torch (25 ft 2pc)
TIG
Parts Kit for PTA-26 and PTW-18 TIG Torches
TIG
Foot Amptrol™ - 25 ft. (7.6m) (6 pin)
TIG
Hand Amptrol™ Rotary Track Style 25 ft (7.6m) (6-Pin)
Product Number
Product Name
LN-25 Pipe Wire Feeder
Gun Receiver Bushing for Lincoln Electric Guns
Gun Receiver Bushing for Tweco® #2 - #4 Guns
K126® PRO Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332
K126® PRO Innershield® 350A FCAW-SS Welding Gun 15 ft 1/16-5/64
Weld Cable Package - Work & Power Lead 2/0 - Tweco® Male & GC500 / Tweco® Male & Lug - 10 ft (3 m)
Tweco-Style Cam-Lock Adapter Plug for 2/0 Cable
Weld Cable - Tweco® Male & Female (3/0, 600A, 60%) - 50 ft (15.3 m)