Carl built this mudroom bench for some friends to very specific measurements due to space limitations. The bench was primarily made from one inch square tube and is 29.5" wide, 16" deep and 30" high. Carl used his Lincoln® Weld-Pak® 100 wire feeder welder to assemble the bench. After the welding was complete, the bench was sanded, cleaned and painted. Carl's friends were so happy with the finished product that they treated him and his wife to a nice dinner.
*The above project images and descriptions have been published to show how individuals used their ingenuity for their own needs, convenience and enjoyment. Only limited details are available and the projects have NOT been engineered by the Lincoln Electric Company. Therefore, when you use the ideas for projects of your own, you must develop your own details and plans and the safety and performance of your work is your responsibility.