Wood Stove


"I recently read a How I Did It article in your iWeld newsletter. Here's a photo of a wood stove I made. I drew my own blueprints and used 3/16" mild steel for the stove, but used 1/4" for the top for a stronger hold with regards to heat buildup. I used 2" flat bar for accessories such as handle, hinges, and draft door.

"I used a Lincoln Electric wire feeder welder with flux-core wire at a setting of 25 and wire feed of 35. I fabricated this project while attending school this year at College of the North Atlantic in Port Aux Basques, NL, Canada, under the teachings of fabrication instructor Mr. David Hardy. The wood stove was completed after 5 months of training in the fitting classes. Thank you."

 

 

*The above project images and descriptions have been published to show how individuals used their ingenuity for their own needs, convenience and enjoyment. Only limited details are available and the projects have NOT been engineered by the Lincoln Electric Company. Therefore, when you use the ideas for projects of your own, you must develop your own details and plans and the safety and performance of your work is your responsibility.