DETAILS
Alloy 5753 has good corrosion resistance in marine applications. with high strength and workability it is commonly used in pressure vessels.
Features
- Magnesium alloyed aluminium for welding of alloys with a maximum of 3.5%
- Good corrosion resistance and excellent colour match after anodizing
- Suitable for a wide range of applications in general construction and structural industry
Typical Applications
- General Construction
- Structural Industry
Welding Positions
- All except vertical down
Shielding Gas
- I1 : Inert gas Ar (100%), I3 : Inert gas Ar+ 0.5-95% He, Flow rate : 14-24 l/min (Argon)
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5754 |
WIRE COMPOSITION
| Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|---|
| ER5754 Requirement | 0.0003 max. | 0.30 max. | 0.10 max. | 0.40 max. | 2.6 - 3.6 | 0.50 max. | 0.40 max. | 0.15 max. | 0.20 max. |
| Typical Result | 0.0001 | 0.06 | 0.01 | 0.13 | 3.0 | 0.29 | 0.07 | 0.05 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
| 2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
| 3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |