Menu Close
Hardfacing Consumables Family Group

Diameters / Packaging

Diameters
 11.3 KG SPOOL
0.045 in (1.1 mm) ED028176
1/16 in (1.6 mm) ED028177

Lincore® 55-G

Flux-Cored Gas-Shielded (FCAW-G)

CLASSIFICATIONS:
EN ISO : T Fe2

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear, and in applications with severe abrasion accompanied by low or moderate impact, works best in Metal-to-Earth applications.

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 11.3 KG SPOOL

DETAILS

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear, and in applications with severe abrasion accompanied by low or moderate impact, works best in Metal-to-Earth applications.

Features

  • To be used on carbon steel and low alloy steel
  • Unlimited layers with proper preheat and interpass temperatures and procedures
  • Produces a deposit which resists metal-to-metal wear and mild abrasion

Feature.Products.PDP.DetailsMain.TypicalApplications

  • Brake, Bucket, Crane, Crush, Cut
  • Drag, Drive, Drum, Extrusion, Hammer
  • Ingot, Kiln, Loader, Logging, Mill
  • Mine Car, Mix, Open Hearth, Plate, Power Generation
  • Rail, Roll, Shovel, Sinter, Teeth, Tractor, Wheel

Feature.Products.PDP.DetailsMain.WeldingPositions

  • All

Feature.Products.PDP.DetailsMain.ShieldingGas

  • 75-90% Argon / Balance CO2 98% Argon / 2% O2

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

Ultracore stainless, flux-cored wire, plastic spool

Lincore® 55-G Flux-Cored (FCAW-G) Wire

ED028177

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Shielding Gas Hardness Rockwell C
Typical Result 98% Ar, 2% O2 56-59
Typical Result 75% Ar, 25% CO2 59-61

DEPOSIT COMPOSITION

Classification Product Size Number of layer Shielding Gas %C %Cr %Mn %Mo %Si
Typical Result .045" (1.1 mm) 2 Layers 75% Ar, 25% CO2 0.39 5.6 1.2 0.6 0.8
Typical Result .045" (1.1 mm) 2 Layers 98% Ar, 2% O2 0.47 6.4 1.4 0.6 1.0
Typical Result 1/16" (1.6 mm) 2 Layers 75% Ar, 25% CO2 0.41 5.3 1.2 0.6 0.8
Typical Result 1/16" (1.6 mm) 2 Layers 98% Ar, 2% O2 0.45 5.5 1.2 0.6 1.0

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity ESO
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Deposition Rate
kg/hr (lb/hr)
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 16 (5/8) 5.1 (200) 27 165 2.0 (4.3)
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 16 (5/8) 7.6 (300) 29 225 3.0 (6.7)
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 16 (5/8) 10.2 (400) 31 290 4.2 (9.2)
0.045 in (1.1 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 5.1 (200) 25 145 2.1 (4.7)
0.045 in (1.1 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 7.6 (300) 28 195 3.3 (7.2)
0.045 in (1.1 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 10.2 (400) 30 245 4.4 (9.7)
0.045 in (1.1 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 5.1 (200) 25 145 2.3 (5.1)
0.045 in (1.1 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 7.6 (300) 27 200 3.4 (7.5)
0.045 in (1.1 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 8.9 (350) 28 225 3.9 (8.7)
0.045 in (1.1 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 10.2 (400) 29 250 4.4 (9.8)
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 20 (3/4) 3.8 (150) 28 260 2.6 (5.8)
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 20 (3/4) 6.4 (250) 30 340 4.7 (10.4)
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 20 (3/4) 8.9 (350) 32 420 6.8 (15.1)
1/16 in (1.6 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 3.8 (150) 25 230 2.7 (6.0)
1/16 in (1.6 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 6.4 (250) 27 315 4.9 (10.7)
1/16 in (1.6 mm) 90% Ar / 10% CO2 DC+ 20 (3/4) 8.9 (350) 29 400 7.0 (15.4)
1/16 in (1.6 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 3.8 (150) 24 220 2.9 (6.4)
1/16 in (1.6 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 6.4 (250) 26 315 5.0 (11.0)
1/16 in (1.6 mm) 98% Ar / 2% O2 DC+ 20 (3/4) 8.9 (350) 28 410 7.1 (15.7)

NOTES

Note
Interpass temperatures between 150°C (300°F) and 200°C (400°F) do not affect the hardness of Lincore® 55 significantly.