LN-25X wire feeder
LN-25X w/CrossLinc and TVT

LN-25X® w/CrossLinc® and TVT (No Flowmeter, Tweco®)

K4267-2

LN-25X with CrossLinc Technology and TVT

Ausgabe

Ausgabe

Eingabe

Eingabe

DETAILS

FULL CONTROL OF YOUR SYSTEM WITH NO CONTROL CABLES

Safety

  • Reduce job site clutter by removing cumbersome control cables
  • Eliminate unnecessary movement of personnel across the worksite
  • Eliminate the need to drag control cables around the site

Quality

  • Full voltage control at the feeder results in the correct settings for every weld
  • Accurately compensate for voltage drop across long cable runs
  • Eliminate unintentional machine adjustments

Productivity

  • Set up faster with fewer cable connections
  • Eliminate helpers or trips to the power source when making setting adjustments
  • Minimize rework with easy settings adjustment

Reliability

  • Fully encapsulated and environmentally protected electronics
  • Replaceable flame resistant case can be installed in under five minutes

CROSSLINC TECHNOLOGY: SOLVING SITE WELDING ISSUES

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.
The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.

Eigenschaften

  • Portable and light weight field construction wire feeder
  • CrossLinc technology provides voltage control on the feeder when paired with a CrossLinc compatible power source. No control cables are needed.
  • TVT compensates for voltage drop across long weld cable lengths, allowing you to weld with the voltage you set at the feeder
  • Included Tweco® input power connection.
  • No flowmeter.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Lieferumfang

  • LN-25X with Internal Contactor
  • Gas Solenoid
  • Arc Sensing Lead & Clip
  • 2 Gun Bushings (K1500-2 installed; K1500-1 loose)

Service Informationen

Ergänzende Produkte

Technische Daten

Gewichte und Abmessungen

Abmessungen (H x B x T) 381 mm x 221 mm x 589 mm (15 in x 8.7 in x 23.2 in)
Nettogewicht 16 kg (37 lbs)

Beschreibung

Maximalstrom 450 A
Kommunikationstechnologie CrossLinc
Versorgungsspannung Drahtvorschub 15-110VDC

Drahtvorschub

Anzahl Antriebsrollen 2 Rollen
Drahtvorschubgerät tragbar
Konfiguration einfach
Spulendurchmesser max. 300mm
Kommunikationstechnologie CrossLinc
Benutzerschnittstelle Anzeige
Drahtdurchmesser max. (Massivdraht) 1.6 mm (1/16 in)
Drahtdurchmesser max. (Fülldraht) 2 mm (5/64 in)
Schweißkopfkonfiguration einfach
Drahtkonfiguration einfach
Brennerbuchse Tweco #2-#5
Bereich Drahtvorschubgeschwindigkeit (IPM) 50-700
Drahtvorschubprozesse MIG/MAG
Fülldraht
Zulassung nach CSA Yes
Zulassung nach UL Yes

Technische Daten

Eingangsspannung 15-110 VDC

Anwendung

Typische Anwendungen Bau & Montage vor Ort
Allgemeine Fertigung
Schwere Maschinen
Fertigung schwerer Bauteile
Stahlbau

Garantie

Garantie 3 Years