VRTEX® ROI-Rechner

The VRTEX® Return on Investment (ROI) Calculator provides an estimate of the potential savings through the use of virtual reality welding simulators in your welding training program. We have made it easy for you to calculate your ROI by developing the calculator. Simply enter your welding program usage and see your calculated savings.

Savings are achievable through:

  • Base material (coupons)
  • Welding gases
  • Welding wire and rod
  • Energy

Base Materials
Base Material Used Cost Per Coupon Number of
Coupons Used
Total Cost
10 Ga Plate $ $0.00
1/4" Plate $ $0.00
3/8" Plate $ $0.00
2" XXS Pipe $ $0.00
6" Schedule 40 Pipe $ $0.00

Consumables
Consumable Used Cost Per lb Consumables
Used (lbs)
Total Cost
1/8" E6010 SMAW $ $0.00
1/8" E7018 SMAW $ $0.00
1/8" E6013 SMAW $ $0.00
0.035" ER70S-6 GMAW $ $0.00
0.045" ER70S-6 GMAW $ $0.00
0.045" E71T-1 FCAW-G $ $0.00
5/64" E71T-8 FCAW-S $ $0.00

Gases
Gases Used Cost Per CF Gases Used (CF) Total Cost
90% Argon 10% CO2 $ $0.00
75% Argon 25% CO2 $ $0.00
100% CO2 $ $0.00

Energy
Energy Cost Savings
Traditional Welding VRTEX®
Voltage (V) VRTEX® Voltage (V)
Current (A) VRTEX® Current (A)
Environmental Units (EU) On Time (Seconds)
Unit Input (V) Rate ($/kWh)
Unit Input (A) Environmental Units (EU)
On Time (Seconds) Cost to run EU $0.00
Rate ($/kWh)
Number of EUs
Cost to run EU $0.00

Calculated Savings
Calculated Savings
Total Base Material Savings $0.00
Total Consumable Savings $0.00
Total Gas Savings $0.00
Total EU Savings $0.00
Total Energy Savings
(Traditional Welding - VRTEX®)
$0.00
Weld Savings $0.00


Widerruf - Lincoln Electric bietet den VRTEX ROI-Rechner als Service für unsere Kunden an, um diese bei der Berechnung der potentiellen Kosteneinsparungen durch den Kauf und die Verwendung einer virtuellen Schweißtrainerlösung zu unterstützen. Die Schätzungen des VRTEX ROI-Rechners dienen lediglich dazu, festzustellen, ob eine weitere Investition in den Kauf eines virtuellen Schweißtrainersystems sinnvoll ist.  Der VRTEX ROI-Rechner liefert nur Schätzungen, welche kein Garantie über wirkliche Einsparungen bieten.  Verschiedene Faktoren, wie Ausbildungslehrpläne, Prozesse, Geräte und Abläufe können zu Abweichungen zu den tatsächlichen Einsparungen führen.