Excalibur Stick Electrode

Diameters / Packaging

Diameters
10 lb
50 lb
1/8 in ED010278
3/16 in ED010281
3/32 in ED032564 ED010283
5/32 in ED010285

Fleetweld® 5P+®

Stick (SMAW)

AWS: E6010

Mild Steel, Cellulosic • AWS E6010

DETAILS

Features

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Typical Applications

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 5
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-480 (62-69) 530-580 (76-85) 23-31 51-122 (38-90) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.12-0.16 0.06 max. 0.50-0.67 0.02 0.07 max. 0.007-0.012 0.004-0.011 0.14-0.25 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 50-85
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 75-135
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 100-175
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC-

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.