Image not found

Diameters / Packaging

Diameters
16 lb Spool
1/16 in (1.6 mm) EDS28438

SuperGlaze® 5183

MIG (GMAW)

CLASSIFICATIONS:
AWS A5.10 : ER5183

Aluminum Welding Wire

DETAILS

Aluminum Magnesium Manganese alloy commonly used for higher strength welding of 5XXX and 6XXX base materials. It’s has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.

Features

  • Designed for applications where higher strength is required
  • For 5083 and 5456 base materials
  • Excellent corrosion resistance ideal for Ship building and marine applications

Typical Applications

  • Marine fabrication and repair
  • Cryogenic tanks
  • Shipbuilding
  • Bicycle frames
  • Railing industry

Welding Positions

  • All except vertical down

Shielding Gas

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Service Information

Documentation

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5183

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cr %Cu %Fe %Mn %Si %Ti
ER5183 Requirement 0.0003 max. 4.3 - 5.2 0.25 max. 0.05 - 0.25 0.10 max. 0.40 max. 0.50 - 1.0 0.40 max. 0.15 max.
Typical Result 0.0003 max. 4.9 0.01 0.07 0.00 0.12 0.6 0.05 0.07

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH)
Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535