Innershield/Outershield/Submerged Arc Wire

Diameters / Packaging

Diameters
(4) 14 lb Coil
50 lb Coil
600 lb Speed Feed® Drum
0.120 in (3.0 mm) ED012732 ED012731
3/32 in (2.4 mm) ED012736 ED012735
5/64 in (2.0 mm) ED012739 ED012740

Innershield® NS-3M

Flux-Cored Self-Shielded (FCAW-S) | ED012740

AWS:
E70T-4
E70T4-AZ-CS3

Innershield® NS-3M from Lincoln Electric is designed for very high deposition rates and increased resistance to hydrogen cracking and porosity on steel containing sulfur or contaminates.

DETAILS

Designed for very high deposition rates and increased resistance to hydrogen cracking and porosity on steel containing sulfur or contaminates. Recommended for single or multiple pass welding on carbon steel and some low alloy steels in applications without impact strength requirements.

Features

  • Very high deposition rates
  • Increased resistance to hydrogen cracking and porosity
  • Soft, low penetrating arc for minimal base material admixture

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-4
AWS AWS A5.36 E70T4-AZ-CS3
CWB CSA W48 E490T4-AZ-CS3-H16 (E492T-4-H16)
DB ISO 17632-A T 38 Z V N 3

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
E70T-4 Requirement DC+ 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC+ 410 (59) 570-640 (82-93) 23

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E70T-4 Requirement DC+ 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC+ 1.3-1.5 0.20-0.27 0.35-0.45 0.011 0.004 0.26-0.30

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
Deposition Rate
kg/hr (lb/hr)
Efficiency
%
5/64 in (2.0 mm) DC+ 54 (2 1/4) 5.1 (200) 29-31 280 5.5 (12.2) 4.6 (10.1) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.1 (240) 30-32 315 6.7 (14.8) 5.5 (12.1) 82
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.6 (260) 30-32 330 7.3 (16.0) 6.0 (13.2) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 7.6 (300) 31-33 350 8.4 (18.6) 6.9 (15.2) 82
3/32 in (2.4 mm) DC+ 76 (3) 2.8 (110) 28-30 250 4.6 (10.1) 3.7 (8.2) 81
3/32 in (2.4 mm) DC+ 76 (3) 3.8 (150) 29-31 300 6.4 (14.0) 5.3 (11.7) 84
3/32 in (2.4 mm) DC+ 76 (3) 4.7 (185) 30-32 350 7.9 (17.4) 6.6 (14.6) 84
3/32 in (2.4 mm) DC+ 76 (3) 5.8 (230) 31-33 400 9.8 (21.6) 8.3 (18.3) 85
3/32 in (2.4 mm) DC+ 76 (3) 7.0 (275) 32-34 450 11.8 (26.0) 10.0 (22.0) 85
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 3.5 (140) 28-30 380 9.0 (19.8) 7.0 (15.5) 78
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 4.4 (175) 29-31 450 11.2 (24.6) 9.1 (20.0) 81
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 5.1 (200) 30-32 500 12.7 (28.0) 10.5 (23.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 7.6 (225) 31-33 550 14.2 (31.4) 11.9 (26.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 5.3 (210) 35-37 450 13.2 (29.0) 11.3 (25.0) 86
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 6.4 (250) 36-38 500 15.6 (34.5) 13.2 (29.0) 84
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 7.6 (300) 37-39 550 18.8 (41.5) 15.4 (34.0) 82
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 9.0 (355) 38-40 600 22.2 (49.0) 18.0 (39.5) 81