LINCOLN ER70S-2 Cut Length TIG Electrode

Diameters / Packaging

Diameters
5KG CARTON BOX (Canada Only)
10 LB BOX
1.6 mm ED701966
1/8 IN ED031110
1/16 IN ED031108
2.0 mm ED702518
2.4 mm ED702387
3.2 mm ED701967
3/32 IN ED031109

SuperGlaze® 5356

TIG (GTAW)

AWS: R5356

Aluminum TIG Welding Rods

DETAILS

Alloy 5356 TIG is used when 40,000 PSI is not a requirement. Suitable for all position non- heat treatable welding applications and recommended for welding 5XXX or 6XXX cast and wrought aluminum alloys

Features

  • Aluminum-magnesium alloy for use on many weldable cast and wrought aluminum alloys
  • Excellent for color matching after anodizing
  • Alloy embossed on each rod for easy identification
  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • High strength filler metal

Typical Applications

Welding Positions

  • All

Shielding Gas

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Cr %Cu %Fe %Mg %Mn %Si %Ti %Zn
ER5356 Requirement 0.0003 max. 0.05 - 0.20 0.10 max. 0.40 max. 4.5 - 5.5 0.05 - 0.20 0.25 max. 0.06 - 0.20 0.10 max.
Typical Result 0.0002 max. 0.12 0.00 0.11 4.9 0.12 0.06 0.10 0.01