DETAILS
Aluminum Silicon filler metal for heat treatable base metals is widely used for welding 6061. Better puddle and fluidity makes it less prone to cracks
Features
- Use on many weldable cast and wrought aluminum alloys
- Generally recommended for welding 5052, any 6XXX series alloys and castings
- Alloy embossed on each rod for easy identification
Typical Applications
- Bicycle frames
- Pressure vessels
Welding Positions
- All
Shielding Gas
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER4043 |
WIRE COMPOSITION
| Classification | %Be | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|
| ER4043 Requirement | 0.0003 max. | 0.30 max. | 0.8 max. | 0.05 max. | 0.05 max. | 4.5 - 6.0 | 0.20 max. | 0.10 max. |
| Typical Result | 0.0000 | 0.03 | 0.1 | 0.01 | 0.00 | 5.1 | 0.01 | 0.00 |