SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
2KG SPOOL
7.26KG SPOOL (S300)
7KG SPOOL (BS300)
300 LB BOX
0.8 mm ED701762
1.0 mm ED703753 ED702736 ED701763
1.2 mm ED702755 ED702737 ED701764
1.6 mm ED702738 ED701765
3/64 IN ED034550

SuperGlaze® 5356

MIG (GMAW)

AWS: ER5356

Aluminum Welding Wire

DETAILS

SuperGlaze 5356 is Aluminum Magnesium alloy very commonly used for higher strength welding of 5XXX and 6XXX base materials. It has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.

Features

  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • The most widely used welding alloy
  • High strength filler metal

Welding Positions

  • All except vertical down

Shielding Gas

  • I1 : Inert gas Ar (100%), #E : Argon/Helium Mixtures, Flow rate :14.2-23.6 l/min

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cr %Cu %Fe %Mn %Si %Ti
ER5356 Requirement 0.0003 max. 4.5 - 5.5 0.10 max. 0.05 - 0.20 0.10 max. 0.40 max. 0.05 - 0.20 0.25 max. 0.06 - 0.20
Typical Result 0.0002 max. 4.9 0.01 0.12 0.00 0.11 0.12 0.06 0.10

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH)
Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535