Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 1/16 in (1.6 mm) | MG276062667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Used for welding materials of similar composition
- Due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking, pitting and crevice corrosion
- Used in LNG applications
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- Power Generation
- General Fabrication
- Maintenance and Repair Welding
Welding Positions
- All
Shielding Gas
- 75% Ar/25% He
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrMo-4 |
| CWB | AWS A5.14 | ERNiCrMo-4 |
WIRE COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrMo-4 Requirement | 0.02 max. | 2.5 max. | 14.5 - 16.5 | 0.50 max. | 4.0 - 7.0 | 1.0 max. | 15.0 - 17.0 | Remainder | 0.04 max. | 0.03 max. | 0.08 max. | 0.35 max. | 3.0 - 4.5 |
| Typical Result | 0.003 max. | 0.0 max. | 15.8 | 0.02 | 5.6 | 0.5 | 15.6 | 0.003 max. | 0.003 max. | 0.03 | 0.00 max. | 3.7 | 59 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |