Blue Max Stainless Wire

Diameters / Packaging

Diameters
33#SPOOL
1/16 in MG718062667

Techalloy® 718

MIG (GMAW)

AWS: ERNiFeCr-2

Mainly used for welding high strength aircraft components and liquid rocket components involving cryogenic temperatures

DETAILS

Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online

Features

  • This alloy can be age hardened to higher strengths
  • Used for welding alloys 718, 706 and X-752
  • Mainly used for welding high strength aircraft components and liquid rocket components involving cryogenic temperatures
  • Q2 Lot┬« - Certificate showing actual wire composition available online

Typical Applications

  • LPG & LNG storage vessels
  • Maintenance and Repair Welding
  • General Fabrication

Welding Positions

  • All

Shielding Gas

  • 75% Ar/25% He

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.14 ERNiFeCr-2
CWB AWS A5.14 ERNiFeCr-2

WIRE COMPOSITION

Classification %Al %B %C %Cr %Cu %Fe %Mn %Mo %P %S %Si %Ti %Nb+Ta %Ni+Co
ERNiFeCr-2 Requirement 0.20 - 0.80 0.006 max. 0.08 max. 17.0 - 21.0 0.30 max. Remainder 0.35 max. 2.80 - 3.30 0.015 max. 0.015 max. 0.35 max. 0.65 - 1.15 4.75 - 5.50 50.0 - 55.0
Typical Result 0.50 0.005 0.06 17.5 0.02 20.2 0.06 3.04 0.003 max. 0.003 max. 0.04 0.93 5.11 52.5

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity Voltage
volts
Approx. Current
amps
.035" (0.9 mm) 75% Ar, 25% He DC+ 26-29 150-190
.045" (1.1 mm) 75% Ar, 25% He DC+ 28-32 180-220
1/16" (1.6 mm) 75% Ar, 25% He DC+ 29-33 200-250