Menu Close
Ultracore stainless, flux-cored wire, plastic spool

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED032215
0.052 in (1.3 mm) ED032278
1/16 in (1.6 mm) ED032214

UltraCore® 81Ni2C-H

Flux-Cored Gas-Shielded (FCAW-G)

CLASSIFICATIONS:
E81T1-Ni2C-JH4
E81T1-C1A6-Ni2-H4

UltraCore® 81Ni2C-H from Lincoln Electric is a 100% CO2 welding wire that exhibits robust low temperature impact properties.

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 33 lb Spool

DETAILS

Designed for welding with 100% CO2 shielding gas. Meets the most demanding requirements in high strength, low alloy applications.

Features

  • Capable of producing weld deposits with impact toughness exceeding 54 - 84 J (40 - 62 ft·lbf) at -51°C (-60°F)
  • Designed for welding with 100% CO2 shielding gas
  • Premium arc performance and bead appearance
  • H4 diffusible hydrogen levels
  • ProTech® foil bag packaging

Typical Applications

  • Mining
  • Offshore
  • Bridge fabrication
  • High strength fabrication

Welding Positions

  • All

Shielding Gas

  • 100% CO2

Service Information

You May Also Need

25lb plastic spool Innershield NR-305

UltraCore® 81Ni1C-H Flux-cored (FCAW-G) Wire

ED032205
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1A75-H Flux-cored (FCAW-G) Wire

ED032207
25lb plastic spool Innershield NR-305

UltraCore® 81Ni2A75-H Flux-cored (FCAW-G) Wire

ED032216
Red Line Premium Leather MIG Stick Welding Gloves

Premium Leather MIG Stick Welding Gloves - Large

K2980-L
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni2C-JH4
AWS AWS A5.36 E81T1-C1A6-Ni2-H4
ABS ABS - Part 2 3YSA H5
CWB CSA W48 E551T1-C1A5-Ni2-H4 (E551T1-Ni2C-JH4)
DNV-GL DNV - 2.9 III Y40MS H5
LR LR - Chapter 11 3YS H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F)
E81T1-Ni2C-JH4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-C1A6-Ni2-H4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 550 (80) 610-660 (88-96) 23 83-107 (61-79) 65-118 (48-87) 49-75 (36-55)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %Ni %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni2C-JH4 Requirement 100% CO2 DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4.0 max.
E81T1-C1A6-Ni2-H4 Requirement 100% CO2 DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4 max.
Typical Result 100% CO2 DC+ 0.0050-0.0060 0.03-0.05 1.02-1.22 2.09-2.43 0.014 max. 0.014 max. 0.25-0.36 1.7-3.2

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 23-28 140 1.8 (4.0) 1.6 (3.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 24-29 150 2.1 (4.6) 1.8 (4.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 165 2.6 (5.7) 2.3 (5.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 25-30 190 3.1 (6.8) 2.7 (6.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 26-31 205 3.6 (8.0) 3.2 (7.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 26-31 225 3.9 (8.6) 3.4 (7.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 10.8 (425) 27-32 245 4.4 (9.7) 3.8 (8.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.1 (475) 28-33 265 4.9 (10.8) 4.3 (9.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 29-34 275 5.2 (11.4) 4.5 (10.0) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 23-28 150 2.0 (4.5) 1.8 (3.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 4.7 (185) 24-29 165 2.5 (5.5) 2.2 (4.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 24-29 190 3.1 (6.7) 2.7 (5.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 215 3.4 (7.5) 2.9 (6.5) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 25-30 235 3.7 (8.2) 3.2 (7.2) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 26-31 255 4.1 (9.0) 3.5 (7.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.5 (335) 26-31 275 4.5 (10.0) 4.0 (8.7) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 27-32 295 5.1 (11.2) 4.4 (9.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 27-34 310 5.4 (12.0) 4.7 (10.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 24-29 200 2.9 (6.3) 2.5 (5.5) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 24-30 210 3.3 (7.4) 2.9 (6.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 25-30 235 3.8 (8.4) 3.3 (7.3) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 25-31 265 4.3 (9.5) 3.7 (8.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 26-31 305 4.8 (10.5) 4.2 (9.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 26-32 305 5.3 (11.6) 4.6 (10.1) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.3 (325) 27-32 335 6.2 (13.7) 5.4 (11.9) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 28-34 365 6.7 (14.7) 5.8 (12.8) 86-88

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.