Submerged arc equipment view all

MAXsa® 22 Feed Head

MAXsa 22 Feed Head

K2370-2

Top Features

  • Flexible Configuration – Can be used in single, tandem, Twinarc® or multiple arc applications.
  • Closed Loop Speed Control – Facilitates full control over starting, running and stopping wire feed speed.
  • IP23 Rated – Tested to withstand harsh environments.
  • Additional Gear Sets included – Used to change the speed ratio to match the requirements of your application.
  • Multi-Axis Rotation – Rotational feed head adjustment in two planes..

Output

Input

Wire Feeder

 

Where To Buy

Equipment Details

Submerged Arc Hard Automation Feed Head

Designed specifically for hard automation applications, the MAXsa® 22 Feed Head delivers accurate wire feeding of large diameter submerged arc wires. Based on Lincoln’s proven gearbox and cast aluminum feedplate, the MAXsa® 22 model features a 40VDC permanent magnet, high torque motor that delivers plenty of traction to push up to 7/32 in. (5.6 mm) diameter solid wire. A top speed of up to 500 ipm (11.43 m/min) can be achieved by changing the gear ratio.

  • Flexible Configuration – Can be used in single, tandem, Twinarc® or multiple arc applications.
  • Closed Loop Speed Control – Facilitates full control over starting, running and stopping wire feed speed.
  • IP23 Rated – Tested to withstand harsh environments.
  • Additional Gear Sets included – Used to change the speed ratio to match the requirements of your application.
  • Multi-Axis Rotation – Rotational feed head adjustment in two planes allows flexible, accurate setup for fixturing or arc locating. Additional positioning flexibility can be achieved with optional horizontal and vertical lift adjusters.
  • Standard Accessories – Including an adjustable wire straightener, cross-seam adjuster and electrical valve flux hopper and mounting bracket for TC-3 carriage.

Click here to go to the CAD File Downloads page

The MAXsa™ 22 is designed specifically for hard automation applications, the MAXsa™ 22 Wire Drive delivers accurate wire feeding of large diameter submerged arc wires. Based on Lincoln’s proven gearbox and cast aluminium feedplate, the MAXsa™ 22 model features a 32VDC permanent magnet, high torque motor that delivers plenty of traction to push up to 7/32 in. (5.6mm) diameter solid wire. A top speed of up to 500 ipm (11.43m/min) can be achieved by changing the gear ratio.

  • Process controller - Provides clear dual digital display of set-up and weld modes, eight memories, AC controls, strike/start/end options, travel stop/start, and timers.
  • Lincoln’s Waveform Control Technology® - Offers the ability to select the right waveform for each application.
  • Severe Duty - Can be stored outdoors.
  • User-Friendly Controls – Can be adjusted on-the-fly to change welding parameters within the same welding mode
  • Controller with Digital Meters - Save procedures, apply procedure limits, and lockout any or all controls.
Wire Speed Range IPM (m/min)
  • 0.25-5.08
  • 0.25-7.62
  • 1.0-12.7m/min
Dimensions (H x W x D) 597 mm x 432 mm x 508 mm
Net Weight 31.75 kg
Flux Hopper

You can download CAD files for this product.

CAD Files Banner

Category
Product Number
Product Name
General
TC-3 Self-Propelled High Capacity Travel Carriage
General
Large Wire Twinarc® Nozzle
General
Tiny Twinarc® Wire Straightener
General
Tiny Twinarc® kit
General
Tiny Twinarc® kit
General
Tiny Twinarc® Kit
General
Flux Hopper
General
Tandem Arc Wire Reels and Mountings
General
Tandem Arc Framework Assembly
General
Flux Hopper
General
Vertical Lift Adjuster
General
Horizontal Adjuster (for NA-3, NA-4, NA-5)
General
Wire Reel Assembly
General
SpreadArc Automatic Welding Head Oscillator
General
Wire Straightener (Automatics)
General
Contact Nozzle Assembly
General
Contact Tip 2 mm), 9.5 mm long, 24 thread
General
Nozzle Tip - 3.2 mm wire diameter
General
Nozzle Tip - 4.8 mm wire diameter
General
Nozzle Tip - 2.4 mm wire diameter
General
Nozzle Tip - 4.0 mm wire diameter
General
Nozzle Tip - 5.5 mm wire diameter
General
Positive Contact Nozzle Assembly
General
Positive contact nozzle assembly
General
Concentric Flux Cone
General
Contact Jaw Assembly
General
Linc-Fill Long Stickout Extension
General
Narrow Gap Nozzle
General
Nozzle Extension, 5"
General
Contact Nozzle Assembly
General
Positive Contact Nozzle Assembly
General
Positive contact nozzle assembly
General
Contact Jaw Assembly
General
Linc-Fill Long Stickout Extension
General
Narrow Gap Nozzle
General
Large Wire Twinarc® Nozzle
General
Tiny Twinarc® kit
General
Tiny Twinarc® kit
General
Tiny Twinarc® Kit
General
TC-3 Self-Propelled High Capacity Travel Carriage
General
Tiny Twinarc® Wire Straightener
General
Flux Hopper
General
Tandem Arc Wire Reels and Mountings
General
Tandem Arc Framework Assembly
General
Horizontal Adjuster (for NA-3, NA-4, NA-5)
General
Wire Reel Assembly
General
SpreadArc Automatic Welding Head Oscillator
General
Wire Straightener (Automatics)
General
Nozzle Tip - 3.2 mm wire diameter
General
Nozzle Extension, 5"
General
Nozzle Tip - 4.8 mm wire diameter
General
Spindle Adapter For Readi-Reels® and Spools
General
Nozzle Tip - 2.4 mm wire diameter
General
Vertical Lift Adjuster
General
Nozzle Tip - 4.0 mm wire diameter
General
Nozzle Tip - 5.5 mm wire diameter
General
Contact Tip 2 mm), 9.5 mm long, 24 thread
General
Concentric Flux Cone