Submerged Arc Welding Tractor
The self propelled, modular Cruiser® travel carriage, used with the Power Wave® AC/DC 1000® SD power source, can deliver deposition rates up to 13.61 kg per arc, per hour for butt and fillet joints on lengthy plate welding applications common in bridge or barge decking, large tank fabrication or shipbuilding.
- Reliable Operation – Strong, rigid and stiff especially where you need it most.
- Sturdy welded base frame.
- Substantial steel mast stands up to daily construction site use.
- Simple cast wheels – Equipped with high temperature and slip resistant rubber tires.
- Robust tube and clamp design – Troublefree feeding component mounting.
- Adjustable extended length outriggers– Make it easy to guide tractor movement.
- Advanced Control Pendant – Removable, lightweight, impact resistant aluminum user interface can be used to save procedures, apply limits and lockouts for any or all controls.
- Common Expendable Parts – All drive rolls, nozzles, contact tips and wire straighteners are shared with the MAXsa™ submerged arc wire drives.
- Multiple Configurations – Flexible system allows set up with or without a track and three or four wheel operation.
Product Name |
|
Product Number |
|
Wire Speed Range IPM (m/min) |
- 15-200 (.4-5.0)
- 15-300 (.4-7.6)
- 50-500 (1.3-12.7)
|
Dimensions (H x W x D) |
736 mm x 548 mm x 914 mm |
Net Weight |
94 kg |
- Conduit Tubing – 1.5 m
- 4.0 mm 600 Amp Contact Nozzle Assembly
- 4.0mm Contact Tip
- Nozzle Extension – 127 mm
- Curved Nozzle Extension 45°
- Nozzle Extension Insulator
- Flux Tubing
- Flux Hose Clamps
- Wire Reel Assembly
- Wheels for Track Operation
- Cross Slide Assembly
- Front and Rear Outriggers
- Enclosed Wire Reel
Wire Straightener (K1733-5) Enclosed Wire Reel (2) Note: Control cable not included.
Category
Product Number
Product Name
General
Tube and Clamp Kit
General
Cross Slide Assembly
General
Wire Straightener (Automatics)
General
Coil Adapter 22-30kg
General
Tiny Twin Kit for Cruiser™
General
Contact Nozzle Assembly
General
Nozzle Extension, 5"
General
Nozzle Extension, 45° Curved
General
Nozzle Tip - 3.2 mm wire diameter
General
Nozzle Tip - 4.8 mm wire diameter
General
Nozzle Tip - 2.4 mm wire diameter
General
Nozzle Tip - 4.0 mm wire diameter
General
Nozzle Tip - 5.5 mm wire diameter
General
Positive Contact Nozzle Assembly
General
Positive contact nozzle assembly
General
Concentric Flux Cone
General
ArcLink®/Linc-Net® Control Cable - 7.6 m
General
ArcLink®/Linc-Net® Control Cable - 15.2 m
General
Heavy Duty ArcLink® Control Cable - 30.5 m
General
Heavy Duty ArcLink® Control Cable - 7.6 m