Tandem Cruiser® Submerged Arc Welding Tractor For Extended Decking Welds
The self propelled, Tandem Cruiser™ travel carriage, used with the Power Wave® AC/DC 1000® SD power source, can deliver deposition rates up to 30 lbs per hour for butt and fillet joints on lengthy plate welding applications common in bridge or barge decking, large tank fabrication or shipbuilding.
- Reliable Operation – Strong, rigid and stiff especially where you need it most.
- Sturdy welded base frame.
- Substantial steel mast stands up to daily construction site use.
- Simple cast wheels – Equipped with high temperature and slip resistant rubber tires.
- Robust Tube and Clamp Design – Troublefree
feeding component mounting.
- Adjustable Extended Length Outriggers– Make it easy to guide tractor movement.
- Advanced Control Pendant – Removable,
lightweight, impact resistant aluminum user interface can be used to save procedures, apply limits and lockouts for any or all controls.
- Common Expendable Parts – All drive rolls, nozzles, contact tips and wire straighteners are shared with the MAXsa™ submerged arc wire drives.
- Multiple Configurations – Flexible system allows set up with or without a track and three or four wheel operation. Not recommended for three wheel operation.
Product Name |
|
Product Number |
|
Wire Speed Range IPM (m/min) |
- 57:1 – 50 - 500 (1.3 – 12.5)
- 95:1 – 15 – 300 (0.4 – 7.5)
- 142:1 – 15 – 200 (0.4 – 5.0)
|
Dimensions (H x W x D) |
927 mm x 1156 mm x 1056 mm |
- Conduit Tubing – 5 feet (1.5 m)
- 5/32 in. 600 Amp Contact Nozzle Assembly
- 5/32 in. Contact Tip
- Nozzle Extension – 5 in. (127 mm)
- Curved Nozzle Extension, 45°
- Nozzle Extension Insulator
- Flux Tubing
- Flux Hose Clamps
- Wire Reel Assembly
- Wheels for Track Operation
- Front and Rear Outriggers
- Enclosed Wire Reels (2)
Note: Does not include a control cable.
Category
Product Number
Product Name
General
Contact Nozzle Assembly
General
Nozzle Extension, 5"
General
Nozzle Extension, 45° Curved
General
Nozzle Tip - 3.2 mm wire diameter
General
Nozzle Tip - 4.8 mm wire diameter
General
Nozzle Tip - 2.4 mm wire diameter
General
Nozzle Tip - 4.0 mm wire diameter
General
Nozzle Tip - 5.5 mm wire diameter
General
Positive Contact Nozzle Assembly
General
Positive contact nozzle assembly
General
Concentric Flux Cone
General
Tube and Clamp Kit
General
Cross Slide Assembly
General
Wire Straightener (Automatics)
General
Coil Adapter 22-30kg
General
Tiny Twin Kit for Cruiser™
General
Tube and Clamp Kit
General
Cross Slide Assembly
General
Wire Straightener (Automatics)
General
Coil Adapter 22-30kg
General
Tiny Twin Kit for Cruiser™
General
Contact Nozzle Assembly
General
Nozzle Extension, 5"
General
Nozzle Extension, 45° Curved
General
Nozzle Tip - 3.2 mm wire diameter
General
Nozzle Tip - 4.8 mm wire diameter
General
Nozzle Tip - 2.4 mm wire diameter
General
Nozzle Tip - 4.0 mm wire diameter
General
Nozzle Tip - 5.5 mm wire diameter
General
Positive Contact Nozzle Assembly
General
Positive contact nozzle assembly
General
Concentric Flux Cone
General
ArcLink®/Linc-Net® Control Cable - 7.6 m
General
ArcLink®/Linc-Net® Control Cable - 15.2 m
General
Heavy Duty ArcLink® Control Cable - 30.5 m
General
Heavy Duty ArcLink® Control Cable - 7.6 m
Category
Product Number
Product Name
Cables
ArcLink®/Linc-Net® Control Cable - 7.6 m
Cables
ArcLink®/Linc-Net® Control Cable - 15.2 m
Cables
ArcLink®/Linc-Net® Control Cable - 30.5 m
Cables
Heavy Duty ArcLink® Control Cable - 7.6 m
Cables
Heavy Duty ArcLink® Control Cable - 15.2 m
Cables
Heavy Duty ArcLink® Control Cable - 30.5 m