Powerful Performance From the Ground Up

Out in the shipyards, construction sites and fabrication shops, it pays to keep it simple.The Flextec 500X multi-process welder is easy to set up and operate, yet rugged enough to stand up to heavy-duty indoor and outdoor applications.

Basic pulse MIG capability is standard on the Flextec 500X , including weld modes for carbon steel, stainless steel, aluminum and metalcore electrodes.

The Flextec 500X welder is also equipped with CrossLinc® technology giving you the flexibility to control the machine from hundreds of feet away without a control cable.

SIMPLE

• Simple interface for ease of use
• CrossLinc technology eliminates extra cables for simple system setup

RELIABLE

• IP 23 rating means the Flextec 500X welder will excel in outdoor environments, such as construction sites and shipyards
• Flextec 500X welder is Desert Duty® rated for operation in the harshest environments (up to 55C)
• Durable trayed and potted PC boards for electronics environmental protection

FLEXIBLE

• Multi-process power source for all your welding needs
• Compatible with all 42VAC wire feeders for MIG and Flux-Cored welding
• Arclink® enabled power source provides synergic pulse modes
• CrossLinc allows for remote control of CV and CC processes without extra cables
• Optimized stick welding for both cellulosic and low hydrogen electrodes
• Touch-start Tig for easy, contamination free starts without high frequency

CROSSLINC TECHNOLOGY COMPATIBILITY

• Full functionality without control cables
• Enables remote procedure setting at the feeder to improve weld quality
• Increases arc time with fewer trips to the power source to adjust settings
• Improves safety by reducing jobsite clutter

 

 

CONTROLS

1. Amperage Display Meter
2. Thermal LED: Output is disabled when an over temperature situation occurs.
3. Output Control Dial
4. Hot Start Control Dial
5. Weld Process Selector Switch
6. Local/Remote Selector Toggle Switch
7. Circuit Breaker Reset Button for the 5-pin Wire Feeder Connector
8. 5-pin ArcLink® Wire Feeder Connector
9. Positive and Negative 1/2 in. (12.7 mm) Welding Output Studs
10. VRD™ (Voltage Reduction Device) LED Indicator Lights
11. Voltage Display Meter
12. Power Switch
13. Arc Force Control Dial
14. Weld Terminals On/Remote Selector Switch
15. Circuit Breaker Reset Button for the 14-pin Wire Feeder Connector
16. 12-pin Remote Connector
17. 14-pin Wire Feeder Connector
18. Wire Feeder Voltmeter Polarity Selection Switch

You can rent this equipment from these Rental Equipment Companies