Flux-cored wire |
UltraCore® 71C - Fast freezing slag for out-of-position welding
- Designed for welding with 100% CO2
- Premium arc performance and bead appearance shielding gas
- ProTech® foil bag packaging
- Meets AWS D1.8 seismic lot waiver requirements
| UltraCore® 71A85 - Fast freezing slag for out-of-position welding
- Designed for welding with 75 - 85% Argon/balance CO2 shielding gas
- Premium arc performance and bead appearance shielding gas
- ProTech® foil bag packaging
- Meets AWS D1.8 seismic lot waiver requirements
| UltraCore® 71A75 Dual - Fast freezing slag for out-of-position welding
- Designed for welding with either 100% CO2 or 75% Argon/25% CO2 shielding gases
- Premium arc performance and bead appearance shielding gas
- ProTech® foil bag packaging
- Meets AWS D1.8 seismic lot waiver requirements
|
UltraCore® 712C - Capable of producing weld deposits
with impact toughness exceeding 27 J
(20 ft·lbf) at -40°C (-40°F) - Designed for welding with 100% CO2
- Premium arc performance and bead appearance
- ProTech® foil bag packaging
| UltraCore® 81NIA75-H - Capable of producing weld deposits
with impact toughness exceeding
88-123 J (65 - 91 ft·lbf) at -40°C (-40°F) - Designed for welding with 75 - 85% Argon/balance CO2 shielding gas
- Premium arc performance and bead appearance
- Meets AWS D1.8 seismic lot waiver requirements
- ProTech® foil bag packaging
| UltraCore® 81NI1C-H - Capable of producing weld deposits
with impact toughness exceeding 88-123 J
(65 - 91 ft·lbf) at -40°C (-40°F) - Designed for welding with 100% CO2 shielding gas
- Premium arc performance and bead appearance
- Meets AWS D1.8 seismic lot waiver requirements
- ProTech® foil bag packaging
|
Stick Electrodes |
|
Excalibur® 7018 MR - Premium arc performance
- Square coating burn-off
- Easy strike and re-strike
- Effortless slag removal
- Minimal spatter for enhanced operability and clean weld surface
| Excalibur® 7018-1 MR - Premium arc performance
- Square coating burn-off
- Effortless slag removal
- Easy strike and re-strike
- Impact toughness tested to -46°C (-50°F)
| Excalibur® 7028 - High deposition rates
- Premium arc performance
- High travel speed
- H8 diffusible hydrogen levels
- Capable of producing weld deposits
with impact toughness exceeding
84 J (60 ft·lbf) at -40°C (-40°F)
|
Excalibur® 8018-C3 MR - Designed to produce a 1% nickel deposit
- Premium arc performance
- Square coating burn-off
- Easy strike and re-strike
- Effortless slag removal
| | |
Submerged Arc Welding Wire and Flux |
|
Lincolnweld® LA-75 - A low carbon, medium manganese, high silicon, nickel-bearing electrode designed for use with Lincolnweld® neutral fluxes
- Suitable for use in applications requiring less than 1% Ni wire composition
| Lincolnweld® LA-85 - A nickel-bearing wire with 0.2% molybdenum designed for use on weathering steels
- Capable of producing weld deposits with 480-550 MPa (70-80 ksi) tensile strength in the as-welded and stress-relieved conditions
| Lincolnweld® L-61 - Industry standard for submerged arc welding applications
- A low carbon, medium manganese, low silicon general purpose submerged arc electrode
- A good choice for a wide range of applications with single or multiple pass subarc welding
|
MIG Wires |
|
SuperArc® L-50 - Moderate levels of manganese and silicon for deoxidization of clean to light mill scale surfaces
- Superior feeding and arc stability
- Copper coated for long contact tip life
- Supports short-circuiting, globular, axial spray and pulsed spray transfer
| SuperArc® L-56 - High levels of manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces
- Excellent toe-wetting provides optimal bead appearance
- Copper coated for long contact tip life
- Supports short-circuiting, globular, axial spray and pulsed spray transfer
| SuperArc® L-59 - High deposition rates similar to metal-cored wire
- Minimal spatter
- Engineered alloy system enhances silicon island management
- Copper coated for long contact tip life
- Fast travel speeds
|
SuperArc® LA-75™ - Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength
- Suitable for use in applications requiring less than 1% Ni weld deposits
- Microguard® Ultra provides superior feeding and arc stability
- Supports short-circuiting, globular, axial spray and pulsed spray transfer
| | |
| | | |
