Portable Work Station

This is my portable work station I made with my Lincoln Precision TIG® 185 (current model is Precision TIG® 225) and Pro-MIG® 175 wire feeder welder (current model is Pro-MIG® 180). All the metal used in this project was recycled material from the garbage. I am a private sanitation engineer (I like the term "garboligist") in the New York City area and I build hot rods in my free time. My work area for building cars consists of the basement and the side of my house (there is no garage).

When I first got your Precision TIG® 185 welder I was unsure of using it. I went to your welding school which was very helpful. It really inspired me to weld everything for everybody!

I needed a place to put my metal shear, panel puncher, shrinker and stretcher, vise, and grinder. I decided to use recycled steel and put it on a bud wheel from a tow truck. I found the 4 inch pipe and 1/2 inch flat plate in our transfer station. So I didn't misplace any of my tools I decided to hook everything onto the work station with steel rods.

When the work station needs to be moved, I just lean it on the rim and spin it to its next location.

My next project is to make a stand for the Pro-MIG® 175.



*The above project images and descriptions have been published to show how individuals used their ingenuity for their own needs, convenience and enjoyment. Only limited details are available and the projects have NOT been engineered by the Lincoln Electric Company. Therefore, when you use the ideas for projects of your own, you must develop your own details and plans and the safety and performance of your work is your responsibility.