Diameters / Packaging
|
Diameters |
33# SPOOL |
|---|---|
| .035 | ED035150 |
| .045 | ED035151 |
| 1/16 | ED035153 |
DETAILS
Blue Max® MIG wire is designed to perform exceptionally at high wire feed speeds
Features
- Heat treatment of material will obtain higher strength and greatly influence mechanical properties
- Precipitation hardening, martensitic stainless steel
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Typical Applications
- Heavy Fabrication
- Offshore
- Heavy Fabrication
Welding Positions
- All
Shielding Gas
- 98% Ar/ 2% O2 (Spray Transfer) & 98% Ar/ 2% O2 (Short Arc)
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER630 |
| CWB | CSA W48 | ER630 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER630 Requirement | 0.05 max. | 16.00 - 16.75 | 3.25 - 4.00 | 0.25 - 0.75 | 0.75 max. | 0.15 - 0.30 | 4.5 - 5.0 | 0.03 max. | 0.03 max. | 0.75 max. | |||
| Typical Result | 0.02-0.03 | 16.48-16.60 | 3.43-3.60 | 0.57-0.58 | 0.09-0.14 | 0.02-0.04 | 0.22-0.25 | 4.6-4.7 | 0.02 | 0.003 max. | 0.44-0.46 | 20 | 19 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% CO2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% CO2 | 28-32 | 180-250 |
| 1/16" (1.6 mm) | 98% Ar, 2% CO2 | 29-33 | 200-280 |