Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
8#CAN/24#CTN
1/8 ED033099
3/32 ED033098

Excalibur® 309/309L-15

Stick (SMAW) | ED033098

AWS: E309-15, E309L-15

Designed for joining stainless steel to mind or low alloy steel

DETAILS

Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release

Features

  • Q2 Lot® - certificate showing actual deposit chemistry and calculated ferrite number (FN) available online
  • Designed for joining stainless steel to mild or low alloy steel
  • Flux coating provides smooth arc transfer and slag is self-peeling for easy removal
  • Fast freezing coating is great for vertical down welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-15, E309L-15
ABS AWS A5.4 E309-15, E309L-15

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
E309-15 Requirement 550 (80) min. 30 min.
E309L-15 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 470-500 (68-72) 620-640 (90-93) 31-38

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-15 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E309L-15 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001-0.002 0.02-0.03 22.6-23.7 0.03-0.10 0.7-1.0 0.02-0.21 0.09-0.15 13.3-13.6 0.02-0.03 0.01-0.02 0.94-1.00 2-10

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 60-70
1/8 in (3.2 mm) DC+ 90-100

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.