Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
8#CAN/24#CTN
10#CAN/30#CTN
1/8 ED033105
3/16 ED033107
3/32 ED033104
5/32 ED033106

Excalibur® 316/316L-16

Stick (SMAW)

AWS: E316-16, E316L-16

Molybdenum grade for increased corrosion resistance

DETAILS

Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release

Features

  • Q2 Lot® - certificate showing actual deposit chemistry and calculated ferrite number (FN) available online
  • Designed with low carbon levels to help eliminate carbide precipitation in high temperature service
  • Molybdenum grade for increased corrosion resistance

Typical Applications

  • General Fabrication
  • Maintenance and Repair
  • Process Industries

Welding Positions

  • All except vertical down

Shielding Gas

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E316-16, E316L-16
ABS AWS A5.4 E316-16, E316L-16
CWB CSA W48 E316-16, E316L-16
MIL MIL-E-22200/2D MIL-316-16, MIL-316L-16

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
E316-16 Requirement 520 (75) min. 30 min.
E316L-16 Requirement 480 (70) min. 30 min.
Typical Result, As-welded 430-510 (63-74) 560-630 (82-91) 34-45

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E316-16 Requirement 0.08 max. 17.0 - 20.0 0.75 max. 0.5 - 2.5 2.0 - 3.0 11.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E316L-16 Requirement 0.04 max. 17.0 - 20.0 0.75 max. 0.5 - 2.5 2.0 - 3.0 11.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001-0.002 0.02-0.03 18.8-19.9 0.04-0.16 0.7-1.0 2.1-2.5 0.03-0.06 11.2-12.5 0.02-0.03 0.01-0.02 0.34-0.50 7-12

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-70
3/32 in (2.4 mm) AC 40-70
1/8 in (3.2 mm) DC+ 60-100
1/8 in (3.2 mm) AC 60-100
5/32 in (4.0 mm) DC+ 90-140
5/32 in (4.0 mm) AC 90-140
3/16 in (4.8 mm) DC+ 120-185
3/16 in (4.8 mm) AC 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.