DETAILS
EXCALIBUR® 410-16 is ideal for typical application on Surfacing Steel Mill Rolls, Furnace and Burner Parts, Turbine Parts, Welding 410 and 410s Stainless Steels. Preheat and interpass temperatures greater than 400°F (200°C) are recommended during welding
Features
- Preheat and interpass temperatures greater than 400°F (200°C) are recommended during welding
- Great for overlay on carbon and low alloy steels
- Welding 410 and 410s Stainless Steels
Typical Applications
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
- Welding 410 and 410s Stainless Steels
Welding Positions
- All except vertical down
Shielding Gas
- N/A
Disclaimers
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E410-16 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| E410-16 Requirement | 520 (75) min. | 20 min. |
| Typical Result, 1 hour @ 745°C (1375°F) | 680-700 (99-101) | 21-22 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| E410-16 Requirement | 0.12 max. | 11.0 - 13.5 | 0.75 max. | 1.0 max. | 0.75 max. | 0.7 max. | 0.04 max. | 0.03 max. | 0.90 max. |
| Typical Result | 0.09-0.10 | 12.8-13.1 | 0.11-0.14 | 0.7-0.9 | 0.03 | 0.2-0.3 | 0.04 | 0.01 | 0.36-0.39 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |