Excalibur Stick Electrode

Diameters / Packaging

Diameters

20 Kg
50 lb
3061172,3061173
1/4 in ED028157
1/8 in ED028153
1/8" 3061142
3/16 in ED028155
3/32 in 3061141 ED028152
5/32 in 3061143 ED028154
7/32 in ED032301

Fleetweld® 35

Stick (SMAW) Electrode

AWS: E6011

Mild Steel, Cellulosic • AWS E6011

DETAILS

Features

  • Welding on galvanized and specially coated steels
  • Sheet metal
  • In-plant pipe welding
  • Steel with moderate surface contaminants

Typical Applications

  • Mild Steel, Cellulosic • AWS E6011
  • Sheet metal
  • In-plant pipe welding
  • Steel with moderate surface contaminants

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6011
ISO ISO 2560-B E4311 A
ABS AWS A5.1 E6011
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Hardness Rockwell B
E6011 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 360-460 (53-67) 430-560 (62-81) 23-37 33-103 (24-76) 73-89

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6011 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.08-0.16 0.01-0.05 0.31-0.60 0.02 max. 0.04 max. 0.004-0.013 0.004-0.014 0.09-0.30 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) AC 50-85
3/32 in (2.4 mm) DC± 40-75
1/8 in (3.2 mm) AC 75-120
1/8 in (3.2 mm) DC± 70-110
5/32 in (4.0 mm) AC 90-160
5/32 in (4.0 mm) DC± 80-145
3/16 in (4.8 mm) AC 120-200
3/16 in (4.8 mm) DC± 110-180
7/32 in (5.6 mm) AC 150-260
7/32 in (5.6 mm) DC± 135-235
1/4 in (6.4 mm) AC 190-300
1/4 in (6.4 mm) DC± 170-270

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.