Submerged Arc Family

Diameters / Packaging

Diameters
55# COIL
1/8 ED034932
3/32 ED034931
5/64 ED034930

Lincolnweld® 316/316LCF

Submerged Arc Welding (SAW)

AWS: ER316, ER316L

Controlled Low Ferrite (Range 3-5)

DETAILS

Lincoln Electric's combination of submerged arc wire and flux is designed to produce sizeable weld deposits with exceptional quality and bead appearance

Features

  • Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
  • Exceeds 15 mils (0.38 mm) of lateral expansion @ -196°C (-320°F)
  • Controlled Low Ferrite (Range 3-5)

Typical Applications

  • LPG & LNG storage vessels
  • General Fabrication
  • Maintenance and Repair Welding

Welding Positions

  • Not applicable

Shielding Gas

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F)
Lateral Expansion
mil @ -196 °C (-320 °F)
Flux
Typical Result 430 (62) 590 (85) 34 47 (35) 21 Lincolnweld® P2007™

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316 Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.02 18.4-18.7 0.11-0.18 1.8 2.5-2.7 0.05-0.06 0.01 12.3-13.3 0.02 0.01 0.35-0.40 4-6 4-5

TYPICAL OPERATING PROCEDURES

Diameter Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
5/64" (2.0 mm) 2.0-6.1 (80-240) 24-30 190-500
3/32" (2.4 mm) 1.5-5.3 (60-210) 26-32 195-575
1/8" (3.2 mm) 0.9-2.8 (35-110) 28-34 200-700
Lincolnweld® P2007™
Lincolnweld® P2007™
Lincolnweld® P2007™