500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
50lb Coil
600lb Accu-trak® Drum
1/8 ED018569
5/32 EDS18570

Lincore® 20

Metal-Cored Submerged Arc (SAW) | EDS18570

Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing build-up applications.

DETAILS

Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing. Great compressive strength under heavy loading. Deposits are generally crack free, machinable and can be flame cut. Deposit thickness is unlimited.Use as an underbase for carbon steel parts prior to hardfacing build-up appliacation.

Features

  • Welds best with Lincolnweld® 801® Submerged Arc (SAW) Flux, Lincolnweld® 802® Submerged Arc (SAW) Flux, or Lincolnweld® 860® Submerged Arc (SAW) Flux
  • Deposit is unlimited layers
  • Metal-cored wire with moderate hardness for build-up before stainless overlay
  • Good crack resistance and high compressive strength

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 23-28

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Ni %Si
Lincolnweld® 801® Typical Result 0.05 1.4 0.6 0.4 2.4 0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 270
3/32 in (2.4 mm) DC+ 3.0 (120) 28 400
3/32 in (2.4 mm) DC+ 4.4 (175) 31 500
1/8 in (3.2 mm) DC+ 1.5 (60) 26 400
1/8 in (3.2 mm) DC+ 2.5 (100) 28 550
1/8 in (3.2 mm) DC+ 3.6 (140) 30 680
5/32 in (4.0 mm) DC+ 1.4 (55) 27 520
5/32 in (4.0 mm) DC+ 2.2 (85) 30 725
5/32 in (4.0 mm) DC+ 2.9 (115) 32 880