500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
50lb Coil
600lb Speed-Feed® Drum
1/8 ED015262 ED015268
3/32 ED015260 ED015261

Lincore® 420

Submerged Arc (SAW) | ED015261

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in Metal-to-Metal wear applications, works best in non-lubricated rolling or sliding

DETAILS

Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing. Great compressive strength under heavy loading. Deposits are generally crack free, machinable and can be flame cut. Deposit thickness is unlimited. Used in Metal-to-Metal wear applications, works best in non-lubricated rolling or sliding.

Features

  • Use on carbon, and low alloy steels
  • Deposit is unlimited layers
  • Metal-cored wire that is most widely used for caster roll rebuilding
  • Works well with Lincolweld 801 or 802 Flux

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 46-50

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.20 12.0 1.2 0.5

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 3.0 (120) 28 375
3/32 in (2.4 mm) DC+ 4.4 (175) 31 450
1/8 in (3.2 mm) DC+ 1.5 (60) 26 350
1/8 in (3.2 mm) DC+ 2.5 (100) 28 500
1/8 in (3.2 mm) DC+ 3.6 (140) 30 625
5/32 in (4.0 mm) DC+ 1.4 (55) 27 475
5/32 in (4.0 mm) DC+ 2.2 (85) 30 650
5/32 in (4.0 mm) DC+ 2.9 (115) 32 800