Diameters / Packaging
|
Diameters |
600 lb (272 kg) Speed-Feed® Drum |
|---|---|
| 1/8 in (3.2 mm) | ED018551 |
DETAILS
Lincore® 423L Metal-Cored Submerged Arc Wire typical application on Caster rolls, recommended to be used primary 802 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by contacting your Lincoln Electric representative. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
Features
- Metal-cored wire, provides a softer “as-welded” deposit than Lincore® 420
- More resistance to softening during tempering above 482°C (900°F)
Typical Applications
- Caster rolls
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 802® | Typical Result | 41-47 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si | %V |
|---|---|---|---|---|---|---|---|---|
| Lincolnweld® 802® | Typical Result | 0.15 | 11.5 | 1.2 | 1.0 | 2.0 | 0.4 | 0.15 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 350 |
| 1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 500 |
| 1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 610 |