DETAILS
Products in this category are iron-based with a large amount of chromium carbides in a hard matrix. These alloys are designed for severe sliding abrasion accompanied by low or moderate impact.
Features
- Iron base chromium carbide alloy designed for applications subject to severe metal to earth abrasion with moderate impact
- Can be used at temperatures up to 704°C (1300°F)
- Can be used on carbon, low alloy, manganese and stainless steels and cast irons
Typical Applications
- Augers
- Bucket lips and sides
- Loaders
- Grinding equipment
- Shaper sides, blades, Farming Tools and Mining equipment
Welding Positions
- Flat/Horizontal
Shielding Gas
- 75-90% Argon / Balance CO2 98% Argon / 2% O2
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
DEPOSIT COMPOSITION
| Base Metal | Number of layer | %C | %Mn | %Si | %Cr |
|---|---|---|---|---|---|
| Carbon Steel | 1 Layer | 4.6 | 1.2 | 0.5 | 13.8 |
| Carbon Steel | 2 Layers | 5.5 | 1.3 | 0.6 | 17.3 |
MECHANICAL PROPERTIES
| Number of layer | Hardness Rockwell C |
|---|---|
| 1 Layer | 58 |
| 2 Layers | 60 |
TYPICAL OPERATING PROCEDURES
| Product Size | Polarity |
ESO
in (mm) |
Shielding Gas |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
|---|---|---|---|---|---|
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 75% Ar, 25% CO2 | 5.1 (200) | 23 - 24 |
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 75% Ar, 25% CO2 | 7.6 (300) | 25 - 26 |
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 90% Ar, 10% CO2 | 5.1 (200) | 22 - 23 |
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 90% Ar, 10% CO2 | 7.6 (300) | 24 - 25 |
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 98% Ar, 2% O2 | 5.1 (200) | 22 - 23 |
| 0.045 in. (1.1 mm) | DC+ | 3/4 (20) | 98% Ar, 2% O2 | 7.6 (300) | 24 - 25 |