Hardfacing Consumables Family Group

Diameters / Packaging

55 lb (25 kg) Coil
10 lb (4.5 kg) Spool
33lb (15kg) Spool
0.045in (1.1mm) ED037243 ED037244
1/16in (1.6mm) ED037245 ED037246
5/64in (2mm) ED037247
7/64in (2.8 mm) ED037248

Lincore® 70-G

Metal-Cored (GMAW-C)

Iron-based with a large amount of chromium carbides in a hard matrix. Severe Abrasion with Low Impact


Argon(Ar) blends and Carbon Dioxide(C02) Shielding Gas. Deposit Composition on carbon steel is 2 layers. Diameter 1.1(mm) ; 1.6(mm) ; 2(mm) ; 2.8(mm) Flat and Horizontal welding positions. Rockwell hardness and wear resistance 67-70(RC) 0.13g mass loss. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.


  • Limited to a maximum of two layers
  • Exceptional wear resistance with deposits that last approximately 2-3 times longer than most chrome carbide and complex carbide alloys, especially in wet abrasion applications
  • Maintains high hardness after exposure to elevated temperature
  • Running this wire as a GMAW-C wire with the recommended shielding gas will reduce fume compared to open arc (FCAW-S) applications
  • Great for high value applications where downtime is costly or replacement parts are expensive

Typical Applications

  • Wearplate
  • Crusher Rolls
  • Ore chutes
  • Screw Augers

Welding Positions

  • Flat/Horizontal

Shielding Gas

  • 75% Ar / 25% CO2 Argon blends


Warning -

Cancer and Reproductive Harm -


You May Also Need