Diameters / Packaging
|
Diameters |
600 lb Speed-Feed® Drum |
|---|---|
| 1/8 in (3.2 mm) | ED034802 |
DETAILS
Iron-based with a large amount of chromium carbides in a hard matrix. These alloys are designed for severe sliding abrasion accompanied by low or moderate impact.
Features
- Limited to 2 layers max
- Chrome carbide deposit provides economical abrasion resistance
- Superior manufacturing process eliminates seam issues and empty tube
Typical Applications
- Wear plate
- Crusher Rolls
- Ore chutes
- Screw Augers
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C | Mass Loss (G65) |
|---|---|---|---|
| Typical Result | 2 Layers | 59 | 0.17 |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Si |
|---|---|---|---|---|---|
| Typical Result | 1.0 max. | 10.0 max. | 35.0 max. | 5.0 max. | 2.0 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 38 (1 1/2) | 4.8 (190) | 29 | 500 |