SuperArc MIG wire, 33 lb. Plastic spool

Diameters / Packaging

Diameters
33 LB SPOOL
1.0 MM ED036532
1.2 MM ED036535

Pipeliner® 70S-6

MIG (GMAW) Wire

AWS: ER70S-6

Pipeliner® 70S-6 from Lincoln Electric is an engineered alloy providing superior impact toughness at low temperatures.

DETAILS

An engineered alloy providing superior impact toughness at low temperatures.

Features

  • An engineered alloy providing superior impact toughness at low temperatures
  • Microguard® Ultra provides superior feeding and arc stability
  • ProTech® packaging system

Typical Applications

  • Root pass welding
  • Hot, fill and cap pass welding of up to X70 grade pipe

Welding Positions

  • All

Shielding Gas

  • Mixed Shielding Gas|100% CO2

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
ABS ABS - Part 2 3YSA
TUV TUV ISO 14341-A G 42 3 C1 3Si1, G 46 4 M21 3Si1, G 46 4 M31 3Si1

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 580 (84) 28 81-95 (60-70)

WIRE COMPOSITION

Classification %C %Cr %Mn %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.10 0.03 1.46 0.01 0.005 0.009 0.82 0.003 max. 0.17

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
1.0 mm (0.040 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 2.5-14.0 (100-550) 19-31 105-320 1.0-5.2 (2.1-11.5)
1.2 mm (0.047 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 3.2-12.7 (125-500) 19-31 145-360 1.7-6.5 (3.7-14.3)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.