50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
50 lb
3.2 mm ED031611
4.0 mm ED031612
5.0 mm ED031613

PIPELINER® 7P+

Stick (SMAW) Electrode | ED031612

AWS: E7010-P1, also meets E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-G, E7010-P1
ISO ISO 2560-A E 46 3 1Ni C 2 1
ABS AWS A5.5 E7010-P1
TUV AWS A5.5 E7010-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
Hardness Rockwell B
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-79) 560-660 (81-95) 22-32 54-110 (40-81) 37-103 (27-76) 81-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 0.11-0.18 0.04 max. 0.50-0.88 0.07-0.20 0.010 max. 0.66-0.97 0.01 0.01 max. 0.10-0.40 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-130
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210