Menu Close
10 lb cans of Pipeliner LH-D stick electrode

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
3.2 x 355 mm (1/8 x 14 in) ED032632
4.0 x 355 mm (5/32 x 14 in) ED032633
4.5 x 355 mm (11/64 x 14 in) ED032634

Pipeliner® LH-D100

Stick (SMAW) | ED032633

CLASSIFICATIONS:
E10045-P2 H4R

Low Alloy, Low Hydrogen, Pipe • AWS E10045-P2 H4R

Diameter

Select Diameter

  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)
  • 4.5 x 355 mm (11/64 x 14 in)

Package

Select Package

  • (3) 10 lb Easy Open Can
Buy Now

DETAILS

Low alloy stick electrode designed for fill and cap pass welding of up to X90 grade pipe

Features

  • Q2 Lot®- Control and Tested - Lot certificate available online
  • Durable coating
  • 80% higher productivity over traditional vertical-up pipe welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

10 lb cans of Pipeliner LH-D stick electrode

Pipeliner® LH-D80

ED032627
10 lb cans of Pipeliner LH-D stick electrode

Pipeliner® LH-D90

ED032630
10 lb cans of Pipeliner LH-D stick electrode

Pipeliner® LH-D90

ED032631
10 lb cans of Pipeliner LH-D stick electrode

Pipeliner® LH-D100

ED032632
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E10045-P2 H4R
CWB CWB AWS A5.5 E6945-P2-H4R (E10045-P2-H4R)

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E10045-P2 H4R Requirement 600 (87) min. 690 (100) min. 16 min. 27 (20) min.
Typical Result, As-welded 650-700 (94-102) 710-750 (103-108) 23-26 77-114 (57-84) 42-85 (31-62) 96-99

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E10045-P2 H4R Requirement 0.12 max. 0.20 max. 0.90 - 1.70 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.80 max. 0.05 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.004-0.0051 0.05-0.06 0.04-0.06 1.44-1.67 0.40-0.46 0.78-0.89 0.01 0.01 0.42-0.56 0.01 2-4 0.03-0.13 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 120-170
4.0 mm (5/32 in) DC+ 170-250
4.5 mm (11/64 in) DC+ 200-300

NOTES

Note
NOTE: This product contains micro-alloying elements. Additional information available on request.