10 lb cans of Pipeliner LH-D stick electrode

Diameters / Packaging

Diameters
10 lb
3.2 mm ED032626
4.0 mm ED032627
4.5 mm ED032628

PIPELINER® LH-D80

Stick (SMAW) | ED032628

AWS: E8045-P2 H4R

Low Alloy, Low Hydrogen, Pipe • AWS E8045-P2 H4R

DETAILS

Low alloy, low hydrogen stick electrode designed for vertical down fill and cap pass welding of up to X70 grade pipe

Features

  • Q2 Lot® - Control and Tested - Lot certificate available online
  • Durable coating
  • NACE MR0175 compliant for sour gas applications
  • 80% higher productivity over traditional vertical-up pipe welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8045-P2 H4R
AllByProd NACE NACE Applications
ABS AWS A5.5 E8045-P2 H4R
CWB CWB AWS A5.5 E5545-P2-H4R (E8045-P2-H4R)

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
Hardness Rockwell B
E8045-P2 H4R Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 470-530 (68-76) 560-590 (81-85) 26-30 54-163 (40-120) 27-147 (20-108) 88-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E8045-P2 H4R Requirement 0.12 max. 0.20 max. 0.90 - 1.70 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.80 max. 0.05 max. 4 max. 0.2 max. 0.4 max.
Typical Result 0.005-0.008 0.04-0.06 0.03-0.05 1.14-1.54 0.02 max. 0.01-0.03 0.01 0.01 max. 0.43-0.60 0.01 2-4 0.1 max. 0.4 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 120-170
4.0 mm (5/32 in) DC+ 170-250
4.5 mm (11/64 in) DC+ 200-300

NOTES

Note
NOTE: This product contains micro-alloying elements. Additional information available on request.