Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED029511
3/16 x 14 in (4.8 x 350 mm) ED029509
5/32 x 14 in (4.0 x 350 mm) ED029513

Shield-Arc® HYP+

Stick (SMAW) | ED029511

CLASSIFICATIONS:
E7010-P1
E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • 50 lb Easy Open Can
Buy Now

DETAILS

Cellulosic electrode specifically designed for pipeline welding

Features

  • Light slag for minimal arc interference
  • Deep penetration
  • Clean, visible weld puddle
  • Superior puddle control

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029509
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030827
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-P1
ABS AWS A5.5 E7010-P1
CWB CSA W48 E4910-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (62-70) 530-580 (76-85) 22-29 27-96 (20-71)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.08-0.16 0.01-0.04 0.43-0.53 0.26-0.33 0.01-0.04 0.01 0.01 max. 0.06-0.18 0.005 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8 in (3.2 mm) DC+ 75-130
5/32 in (4.0 mm) DC+ 90-185
3/16 in (4.8 mm) DC+ 140-225