SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
1 LB SPOOL
16 LB SPOOL
20 LB SPOOL
60 LB DRUM
300 LB BOX
0.035 IN ED030312 ED028385 ED034722
1/16 IN ED030283 ED034551
3/64 IN ED030314 ED030282 ED036593 ED034550

SuperGlaze® 5356

MIG (GMAW) Wire

AWS: ER5356

Aluminum Welding Wire

DETAILS

SuperGlaze 5356 is Aluminum Magnesium alloy very commonly used for higher strength welding of 5XXX and 6XXX base materials. It has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.

Features

  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • The most widely used welding alloy
  • High strength filler metal

Welding Positions

  • All except vertical down

Shielding Gas

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cr %Cu %Fe %Mn %Si %Ti
ER5356 Requirement 0.0003 max. 4.5 - 5.5 0.10 max. 0.05 - 0.20 0.10 max. 0.40 max. 0.05 - 0.20 0.25 max. 0.06 - 0.20
Typical Result 0.0002 max. 4.9 0.01 0.12 0.00 0.11 0.12 0.06 0.10

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH)
Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535