Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 0.035 in (0.9 mm) | MG55035667 |
| 0.045 in (1.1 mm) | MG55045667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- The welds are moderately hard and require carbide tipped tools for machining
- A preheat and inter-pass temperature of not less than 350°F (175°C) is required during welding on cast iron to minimize the potential for cracks
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- Maintenance and Repair Welding
- Used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels
- Readily used for the repair of castings
Welding Positions
- All
Shielding Gas
- 75% Ar/25% He
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
WIRE COMPOSITION
| Classification | %C | %Cu | %Mn | %S | %Si | %Al | %Fe | %Ni+Co |
|---|---|---|---|---|---|---|---|---|
| Typical Result | 0.03 | 0.1 | 0.7 | 0.002 | 0.1 | 0.1 | 44.5 | 54.0 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 0.9 mm (0.035 in) | 75% Ar / 25% He | DC+ | 26-29 | 150-190 |
| 1.1 mm (0.045 in) | 75% Ar / 25% He | DC+ | 28-32 | 180-220 |