Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 0.035 in (0.9 mm) | MG606035667 |
| 0.045 in (1.1 mm) | MG606045667 |
| 1/16 in (1.6 mm) | MG606062667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Used for TIG, MIG and SAW welding of base materials such as ASTM B163, B166, B167 and B168 - alloys which have UNS Number N06601
- Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family
- Used for dissimilar welding applications between various nickel alloys and stainless or carbon steels, as well as for overlay
Typical Applications
- Maintenance and repair welding
- General Fabrication
- Process Industries
Welding Positions
- All
Shielding Gas
- 75% Ar/25% He
Disclaimers
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCr-3 |
| CWB | AWS A5.14 | ERNiCr-3 |
| MIL | MIL-E-21562E | EN82 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCr-3 Requirement | 0.10 max. | 18.0 - 22.0 | 0.50 max. | 3.0 max. | 2.5 - 3.5 | 0.03 max. | 0.015 max. | 0.50 max. | 0.75 max. | 2.0 - 3.0 | 67.0 min. |
| Typical Result | 0.04 | 19.9 | 0.02 | 1.2 | 2.9 | 0.003 max. | 0.003 max. | 0.10 | 0.35 | 2.4 | 73.2 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |