Diameters / Packaging
|
Diameters |
55 lb Coil |
|---|---|
| 1/8 in (3.2 mm) | SA617125726 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- The weld metal provides optimum strength and oxidation resistance from 1500°F (815°C) up to 2100°F (1150°C)
- Used for MIG, TIG and SAW welding of nickel-chrome-cobalt-molybdenum alloys
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- General Fabrication
- Power Generation
- Power Plant
Welding Positions
- All
Shielding Gas
- N/A
Disclaimers
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrCoMo-1 |
| CWB | CWB AWS A5.14 | ERNiCrCoMo-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrCoMo-1 Requirement | 0.8 - 1.5 | 0.05 - 0.15 | 10.0 - 15.0 | 20.0 - 24.0 | 0.50 max. | 3.0 max. | 1.0 max. | 8.0 - 10.0 | Remainder | 0.03 max. | 0.015 max. | 1.0 max. | 0.60 max. |
| Typical Result | 1.4 | 0.07 | 11.6 | 22.9 | 0.02 | 0.5 | 0.3 | 8.8 | 54 | 0.003 max. | 0.003 max. | 0.0 max. | 0.36 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Voltage
volts |
Approx. Current
amps |
Flux |
|---|---|---|---|---|
| 1/8" (3.2 mm) | DC+ | 29-31 | 350-450 | Lincolnweld® P2000™ |