Diameters / Packaging
|
Diameters |
55 lb Basket |
500 lb Speed-Feed® Drum |
|---|---|---|
| 1/8 in (3.2 mm) | SA625125726 | SA625125692 |
| 3/32 in (2.4 mm) | SA625093726 | SA625093692 |
| 5/32 in (4.0 mm) | SA625156692 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online.
Features
- Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments
- The high molybdenum content provides good stress, pitting and crevice corrosion resistance
- Most popular nickel alloy for cladding
- Provides high temperature strength and structural stability
Typical Applications
- Offshore
- Maintenance and Repair Welding
- Power Generation
Welding Positions
- All
Shielding Gas
- N/A
Disclaimers
Service Information
Documentation
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrMo-3 |
| CWB | CWB AWS A5.14 | ERNiCrMo-3 |
| MIL | MIL-E-21562E | EN625 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrMo-3 Requirement | 0.40 max. | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 5.0 max. | 0.50 max. | 8.0 - 10.0 | 0.02 max. | 0.015 max. | 0.50 max. | 0.40 max. | 3.15 - 4.15 | 58.0 min. |
| Typical Result | 0.10 | 0.01 | 22.2 | 0.01 | 0.3 | 0.01 | 8.8 | 0.003 max. | 0.003 max. | 0.06 | 0.21 | 3.47 | 64.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 3/32" (2.4 mm) | DC+ | 28-30 | 275-350 |
| 1/8" (3.2 mm) | DC+ | 29-31 | 350-450 |
| Lincolnweld® P2000™ | |||
| Lincolnweld® P2000™ |