Diameters / Packaging
Diameters |
(3) 10 lb Easy Open Can |
---|---|
1/8 x 14 in (3.2 x 350 mm) | EL112LFE125634 |
3/16 x 14 in (4.8 x 350 mm) | EL112LFE187634 |
5/32 x 14 in (4.0 x 350 mm) | EL112LFE156634 |
DETAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Features
- A low iron version of the standard Tech-Rod® 112 covered electrode which is used to weld nickel-chromium-molybdenum alloys
- The product is designed to have less than 1% Iron (Fe) for overlay applications to minimize dilution of parent metal iron in the deposit
- Product typically achieves Fe levels of 1% or less in a weld deposit
- Q2 Lot® - certificates showing actual deposit composition available online
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.11 | ENiCrMo-3 |
MECHANICAL PROPERTIES
Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
---|---|---|
ENiCrMo-3 Requirement | 760 (110) min. | 30 min. |
Typical Result, As-welded | 770 (112) | 43 |
DEPOSIT COMPOSITION
Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
---|---|---|---|---|---|---|---|---|---|---|---|
ENiCrMo-3 Requirement | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 7.0 max. | 1.0 max. | 8.0 - 10.0 | 0.03 max. | 0.02 max. | 0.75 max. | 3.15 - 4.15 | 55.0 min. |
Typical Result | 0.04 | 22.6 | 0.00 | 0.8 | 0.5 | 8.7 | 0.01 | 0.00 | 0.30 | 3.76 | 62.8 |
TYPICAL OPERATING PROCEDURES
Diameter |
Current
Amps |
---|---|
1/8" (3.2 mm) | 80-110 |
5/32" (4.0 mm) | 110-140 |
3/16" (4.8 mm) | 110-160 |