Stick Electrode 50 lb. Box

Diameters / Packaging

Diameters
40lb master pack (10lb Cartons)
1/8 ED022003
3/16 ED022007
5/32 ED022005

Wearshield® MI

Stick (SMAW) Electrode

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding metal-to-metal wear.

DETAILS

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding metal-to-metal wear.

Features

  • Can be used on carbon and low alloy steel parts
  • Deposits tend to cross check and are usually best limited to two layers
  • General purpose electrode, a good compromise for metal-to-metal wear, moderate impact and mild abrasion

Typical Applications

  • Boom heels, Conveyor screws
  • Dipper lips, Tractor grousers
  • Ditcher teeth, Lumber equipment
  • Hammer mills

Welding Positions

  • Flat/Horizontal

Shielding Gas

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Number of layer Hardness Rockwell C
Typical Result 1 Layer 50
Typical Result 2 Layers 54

DEPOSIT COMPOSITION

Classification Base Metal Number of layer %C %Cr %Mn %Mo %Si
Typical Result Mild Steel 2 Layers 0.9 9.5 0.4 0.6 0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8" (3.2 mm) AC 70-120
1/8" (3.2 mm) DC+ 70-120
5/32" (4.0 mm) AC 110-150
5/32" (4.0 mm) DC+ 110-150
3/16" (4.8 mm) AC 150-200
3/16" (4.8 mm) DC+ 150-200