Designed for manufacturers looking for a cost-effective, entry-level robotic solution, the FabMate FT is ideal for welding fixed horizontal welds on medium-sized parts that do not need to be rotated or tilted. Available in a single 87 in. by 36 in. zone or dual 43 in. by 36 in. zones, this product provides enhanced flexibility and weld quality while lowering the cost of re-work and material waste.
- Everything you need to start welding robotically.
- Lower investment.
- Quick delivery and setup time.
- Palletized base with small footprint.
- Reliable and consistent production.
- Compliant with safety requirements.
Cancer and Reproductive Harm -www.P65Warnings.ca.gov
|System Type||Fixed Table|
|Axes for Part Rotation||0|
|Number of Work Zones||1|
|Overall Footprint Width in (mm)||115 (2934)|
|Overall Footprint Depth in (mm)||89 (2266)|
|Sweep in (mm)||N/A|
|Span in (mm)||N/A|
|Fixed Table Work Envelope in (mm)||37 x 92 [950 x 2350]|
|Turntable Diameter in (mm)||N/A|
|Payload Per Zone lb (kg)||1102 |
|Panel Type||Wire Mesh/Curtain|
|Roll Up Door||No|
|Robot Programming Training Included||Yes|
|Sensor Protected Work Zones||No|
|Sensor Interlocked Access Points||Yes|
|Flash Barrier Type||Automatic|
|Fume Extraction Equipment||Optional|
|Crown Mounted Robot||No|
|Robotic Torch Cleaning Station||Optional|
|Weld Gas Distribution Station||No|
|Weld Gas Flow Monitor||No|
|Pneumatic Distribution Station||No|
|Zero Friction Wire Delivery||No|
|Wire Detect Sensors||No|