Generic 8lb can

EXCALIBUR® 11018M MR®

Stick (SMAW) Electrode | ED032607

AWS: E11018M-H4R

Low Alloy, Low Hydrogen • AWS E11018M H4R

DETAILS

Low alloy stick electrode designed for General fabrication of high strength steels

Features

  • Square coating burn-off
  • Easy strike
  • Easy slag removal
  • Premium arc performance

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E11018M-H4R
ABS ABS - Part 2 4YQ620 H5
ABS AWS A5.5 E11018M-H4R
CWB AWS A5.5 E11018M-H4R
CWB CWB AWS A5.5 E7618M-H4R (E11018M-H4R)
DNV-GL DNV - 2.9 4 Y62H5

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F)
Hardness Rockwell B
E11018M-H4R Requirement 680-760 (98-110) 760 (110) min. 20 min. 27 (20) min.
Typical Result, As-welded 700-750 (101-109) 760-810 (110-117) 21-25 52-110 (38-81) 98-103

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E11018M-H4R Requirement 0.10 max. 0.40 max. 1.30 - 1.80 0.25 - 0.50 1.25 - 2.50 0.030 max. 0.030 max. 0.60 max. 0.05 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.05-0.06 0.04-0.13 1.59-1.80 0.42-0.49 2.22-2.50 0.009-0.012 0.005-0.010 0.40-0.49 0.01 max. 1.4-3 0.02-0.11 0.1-0.3

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3/32 in (2.4 mm) DC+ 70-110
1/8 in (3.2 mm) DC+ 90-160
5/32 in (4.0 mm) DC+ 130-210
3/16 in (4.8 mm) DC+ 180-300